- Description
- Shipping
- Returns
- Size Chart
- 300V Factory Line is the product of several years of development as a result of involvement in the World Superbike and Enduro Championships, and research with a large team of specialists
- This lubricant is the result of cutting-edge technology and Motul's commitment to competition. Motul anticipates future 4-stroke technologies and works alongside race teams at the highest levels of competition to push the boundaries of oil formulation to optimise engine performance
- 300V Factory Line is especially suited for the latest high revving, high horsepower four-stroke MX race bikes
- Lower viscosity at high temperatures with a coating that remains consistent thanks to the specifications of the synthetic esters, these molecules adhere to the metallic parts of the engine thus reinforcing the resistance of the oil coating
- Increased resistance to high temperatures eliminates lubricant oxidation, where the oil thickens and lubrication ceases: thanks to the use of esters,300V Factory Line resists viscosity breakdown twice as long as a conventional oil
- Lower friction for increased power
- Exceptional film strength to protect the engine and gear box
- Perfect for wet clutches
PERFORMANCE
Above existing standards
Wet clutch compatibility checked on JASO T904 test.
Reference team: Deletang Endurance, GMT94 endurance, Rinaldi Yamaha World MX
Extra engine power up to 3% : Double Ester technology.
Tribologic tests performed put in evidence low traction coefficient of chosen polymer and complex Esters.
Low traction coefficient reduces engine internal friction and then increase power output.
Engine protection : 0% shear loss on Bosch test ASTM D6278
Gearbox protection : shear resistance improved by 66% on KRL 20 hours tests (CEC L-45-A-99) – test originally set up for gearbox lubricants, 10 times more severe than Bosch test.
Extra power at the rear wheel : Wet clutch lock up improvement.
Optimum engine performance up to the end of the race.
RECOMMENDATIONS
Oil change: According to your own use. Can be mixed with synthetic or mineral lubricants.
PROPERTIES
Colour Visual Yellow / Green Fluo
Viscosity grade SAE J 300 10W-40
Density at 20°C (68°F) ASTM D1298 0.860
Viscosity at 40°C (104°F) ASTM D445 82.3 mm²/s
Viscosity at 100°C (212°F) ASTM D445 13.13 mm²/s
Viscosity index ASTM D2270 160 Pour point ASTM D97 -42°C / - 43°F
Flash point ASTM D92 240°C / 464°F
TBN ASTM D 2896 8.3 mg KOH/g
Products marked as "In Stock" are stored in our different distribution centers. These products will ship within 1-3 business days.
Items are then sent by courier, we use Courierpost & Posthaste which will take 1-3 days to arrive depending on your location and the size of the parcel.
While we will do our best to ship from the distribution center closest to you, not all items will always be in stock in every location at all times. In some cases we will split the order and ship each package out to you individually and in other cases we may need to consolidate the items in one location to ship out as one package. We utilize our best judgment in an attempt to get the products to you as quickly as possible.
Our returns policy lasts 90 days. If 90 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 90 days after delivery